[ARMedslack] ARMedslack hangs during boot on Dreamplug

[Stuart Winter]

> tftpboot 0x01100000 armedslack-13.37/uinitrd-kirkwood.img
> tftpboot 0x00800000 armedslack-13.37/uImage-kirkwood
> setenv bootargs console=ttyS0,115200 nodhcp kbd=us root=/dev/ram rw
> bootm 0x00800000 0x01100000
>
> *** install armedslack and reboot ***
>
> setenv bootargs_console console=ttyS0,115200
> setenv bootargs_root 'root=/dev/sda3 waitforroot=10 rootfs=ext4'
> setenv bootcmd 'setenv bootargs $(bootargs_console) $(bootargs_root); run bootcmd_slk ; reset'
> setenv bootcmd_slk 'usb start;ext2load usb 0:1 0x01100000 /uinitrd-kirkwood;ext2load usb 0:1 0x00800000 /uImage-kirkwood;bootm 0x00800000 0x01100000'
> setenv ethaddr F0:AD:4E:00:E5:BD
> setenv eth1addr F0:AD:4E:00:E5:BE
> saveenv
> reset

I found that the u-boot on my Trimslice wouldn't work with these settings
as, for some reason, it failed to expand some of the variables set.

Look at these instead
ftp://ftp.armedslack.org/armedslack/armedslack-devtools/tegra/booting.txt

You'll want to set all of the relevant settings in the single 'bootargs'
variable.  It'll probably work then.

Try this:

setenv bootargs 'console=ttyS0,115200 root=/dev/sda3 waitforroot=5 rootfs=ext4'
setenv bootcmd_slk 'usb start;ext2load usb 0:1 0x01100000 /uinitrd-kirkwood;ext2load usb 0:1 0x00800000 /uImage-kirkwood;bootm 0x00800000 0x01100000'
setenv bootcmd 'run bootcmd_slk ; reset'
save
reset