[ARMedslack] Armedslack on the Efika i.MX515 (ARM Cortex-A8 800MHz)
lee jones
slothpuck at gmail.com
Sat Aug 27 12:54:15 UTC 2011
The contents of /var/log/messages if its useful :) !
Aug 27 12:40:04 slackware syslogd 1.5.0: restart.
Aug 27 12:40:04 slackware klogd: klogd 1.5.0, log source = /proc/kmsg
started.
Aug 27 12:40:04 slackware klogd: [ 0.000000] Initializing cgroup subsys
cpuset
Aug 27 12:40:04 slackware klogd: [ 0.000000] Linux version
2.6.31.14.20-efikamx (root at buildbot) (gcc version 4.5.1 (Ubuntu/Linaro
4.5.1-7ubuntu2) ) #2 PREEMPT Mon Feb 28 21:18:36 CST 2011
Aug 27 12:40:04 slackware klogd: [ 0.000000] Kernel command line:
console=tty1 root=/dev/mmcblk0p2 rootwait ro
Aug 27 12:40:04 slackware klogd: [ 0.000000] Dentry cache hash table
entries: 65536 (order: 6, 262144 bytes)
Aug 27 12:40:04 slackware klogd: [ 0.000000] Inode-cache hash table
entries: 32768 (order: 5, 131072 bytes)
Aug 27 12:40:04 slackware klogd: [ 0.000000] Memory: 416MB = 416MB total
Aug 27 12:40:04 slackware klogd: [ 0.000000] Memory: 410884KB available
(3564K code, 589K data, 136K init, 0K highmem)
Aug 27 12:40:04 slackware klogd: [ 0.000000] SLUB: Genslabs=11,
HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Aug 27 12:40:04 slackware klogd: [ 0.000000] Hierarchical RCU
implementation.
Aug 27 12:40:04 slackware klogd: [ 0.000000] NR_IRQS:368
Aug 27 12:40:04 slackware klogd: [ 0.000000] MXC IRQ initialized
Aug 27 12:40:04 slackware klogd: [ 0.000000] console [tty1] enabled
Aug 27 12:40:04 slackware klogd: [ 0.000000] Calibrating delay loop...
799.53 BogoMIPS (lpj=3997696)
Aug 27 12:40:04 slackware klogd: [ 0.000000] Initializing cgroup subsys
ns
Aug 27 12:40:04 slackware klogd: [ 0.000000] Initializing cgroup subsys
cpuacct
Aug 27 12:40:04 slackware klogd: [ 0.000000] Initializing cgroup subsys
freezer
Aug 27 12:40:04 slackware klogd: [ 0.000000] Initializing cgroup subsys
net_cls
Aug 27 12:40:04 slackware klogd: [ 0.000000] CPU: Testing write buffer
coherency: ok
Aug 27 12:40:04 slackware klogd: [ 0.000000] devtmpfs: initialized
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: core version 0.5
Aug 27 12:40:04 slackware klogd: [ 0.000000] NET: Registered protocol
family 16
Aug 27 12:40:04 slackware klogd: [ 0.000000] i.MX IRAM pool: 128
KB at 0x9a840000
Aug 27 12:40:04 slackware klogd: [ 0.000000] IRAM READY
Aug 27 12:40:04 slackware klogd: [ 0.000000] CPU is i.MX51 Revision 3.0
Aug 27 12:40:04 slackware klogd: [ 0.000000] MXC GPIO hardware
Aug 27 12:40:04 slackware klogd: [ 0.000000] Efika MX: mmc0 configured as
MicroSD
Aug 27 12:40:04 slackware klogd: [ 0.000000] Efika MX: mmc1 configured as
external SDHC
Aug 27 12:40:04 slackware klogd: [ 0.000000] Efika MX: Smartbook Revision
2.0
Aug 27 12:40:04 slackware klogd: [ 0.000000] Efika MX: Memory type Hynix
DDR2
Aug 27 12:40:04 slackware klogd: [ 0.000000] Using SDMA I.API
Aug 27 12:40:04 slackware klogd: [ 0.000000] MXC DMA API initialized
Aug 27 12:40:04 slackware klogd: [ 0.000000] SCSI subsystem initialized
Aug 27 12:40:04 slackware klogd: [ 0.000000] CSPI: mxc_spi-0 probed
Aug 27 12:40:04 slackware klogd: [ 0.000000] IPU DMFC NORMAL mode:
1(0~1), 5B(4,5), 5F(6,7)
Aug 27 12:40:04 slackware klogd: [ 0.000000] NET: Registered protocol
family 8
Aug 27 12:40:04 slackware klogd: [ 0.000000] NET: Registered protocol
family 20
Aug 27 12:40:04 slackware klogd: [ 0.000000] mc13892 Rev 2.0 FinVer 2
detected
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: SW1: 600 <-->
1375 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: SW2: 900 <-->
1850 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: SW3: 1100 <-->
1850 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: SW4: 1100 <-->
1850 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: SWBST: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VIOHI: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VPLL: 1050 <-->
1800 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VDIG: 1650 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VSD: 1800 <-->
3150 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VUSB2: 2400 <-->
2775 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VVIDEO: 2775 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VAUDIO: 2300 <-->
3000 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VCAM: 2500 <-->
3000 mV fast normal
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VGEN1: 1200 <-->
3150 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VGEN2: 1200 <-->
3150 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VGEN3: 1800 <-->
2900 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: VUSB: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: GPO1: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: GPO2: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: GPO3: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] regulator: GPO4: 0 mV
Aug 27 12:40:04 slackware klogd: [ 0.000000] Device spi1.0 probed
Aug 27 12:40:04 slackware klogd: [ 1.067933] NET: Registered protocol
family 2
Aug 27 12:40:04 slackware klogd: [ 1.068321] IP route cache hash table
entries: 4096 (order: 2, 16384 bytes)
Aug 27 12:40:04 slackware klogd: [ 1.069353] TCP established hash table
entries: 16384 (order: 5, 131072 bytes)
Aug 27 12:40:04 slackware klogd: [ 1.069657] TCP bind hash table entries:
16384 (order: 4, 65536 bytes)
Aug 27 12:40:04 slackware klogd: [ 1.069836] TCP: Hash tables configured
(established 16384 bind 16384)
Aug 27 12:40:04 slackware klogd: [ 1.069867] TCP reno registered
Aug 27 12:40:04 slackware klogd: [ 1.070091] NET: Registered protocol
family 1
Aug 27 12:40:04 slackware klogd: [ 1.070330] Unpacking initramfs...
Aug 27 12:40:04 slackware klogd: [ 1.476889] Freeing initrd memory: 6596K
Aug 27 12:40:04 slackware klogd: [ 1.477916] LPMode driver module loaded
Aug 27 12:40:04 slackware klogd: [ 1.477954] Static Power Management for
Freescale i.MX51
Aug 27 12:40:04 slackware klogd: [ 1.478289] PM driver module loaded
Aug 27 12:40:04 slackware klogd: [ 1.478583] sdram autogating driver
module loaded
Aug 27 12:40:04 slackware klogd: [ 1.478963] Bus freq driver module
loaded
Aug 27 12:40:04 slackware klogd: [ 1.479031] mxc_dvfs_core_probe
Aug 27 12:40:04 slackware klogd: [ 1.479348] DVFS driver module loaded
Aug 27 12:40:04 slackware klogd: [ 1.479386] i.MXC CPU frequency driver
Aug 27 12:40:04 slackware klogd: [ 1.480023] DVFS PER driver module
loaded
Aug 27 12:40:04 slackware klogd: [ 1.481823] squashfs: version 4.0
(2009/01/31) Phillip Lougher
Aug 27 12:40:04 slackware klogd: [ 1.481896] msgmni has been set to 815
Aug 27 12:40:04 slackware klogd: [ 1.483541] alg: No test for stdrng
(krng)
Aug 27 12:40:04 slackware klogd: [ 1.483912] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 252)
Aug 27 12:40:04 slackware klogd: [ 1.483963] io scheduler noop registered
(default)
Aug 27 12:40:04 slackware klogd: [ 1.484006] io scheduler cfq registered
Aug 27 12:40:04 slackware klogd: [ 1.536711] mxc_ipu mxc_ipu: Channel
already disabled 9
Aug 27 12:40:04 slackware klogd: [ 1.536722] mxc_ipu mxc_ipu: Channel
already uninitialized 9
Aug 27 12:40:04 slackware klogd: [ 1.547594] IPU DMFC DP HIGH RESOLUTION:
1(0,1), 5B(2~5), 5F(6,7)
Aug 27 12:40:04 slackware klogd: [ 1.578714] Serial: MXC Internal UART
driver
Aug 27 12:40:04 slackware klogd: [ 1.579052] mxcintuart.0: ttymxc0 at
MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
Aug 27 12:40:04 slackware klogd: [ 1.584451] loop: module loaded
Aug 27 12:40:04 slackware klogd: [ 1.586394] mice: PS/2 mouse device
common for all mice
Aug 27 12:40:04 slackware klogd: [ 1.586635] mc13892 rtc probe start
Aug 27 12:40:04 slackware klogd: [ 1.588038] pmic_rtc pmic_rtc.1: rtc
core: registered pmic_rtc as rtc0
Aug 27 12:40:04 slackware klogd: [ 1.588202] mc13892 rtc probe succeed
Aug 27 12:40:04 slackware klogd: [ 1.588484] i2c /dev entries driver
Aug 27 12:40:04 slackware klogd: [ 1.589263] Linux video capture
interface: v2.00
Aug 27 12:40:04 slackware klogd: [ 1.589927] mxc_v4l2_output
mxc_v4l2_output.0: Registered device video0
Aug 27 12:40:04 slackware klogd: [ 1.590306] MXC WatchDog Driver 2.0
Aug 27 12:40:04 slackware klogd: [ 1.590961] MXC Watchdog # 0 Timer:
initial timeout 60 sec
Aug 27 12:40:04 slackware klogd: [ 1.591388] cpuidle: using governor
ladder
Aug 27 12:40:04 slackware klogd: [ 1.591495] cpuidle: using governor menu
Aug 27 12:40:04 slackware klogd: [ 1.594333] PMIC Character device:
successfully loaded
Aug 27 12:40:04 slackware klogd: [ 1.597366] VPU initialized
Aug 27 12:40:04 slackware klogd: [ 1.601039] Registered led device:
led:capslock
Aug 27 12:40:04 slackware klogd: [ 1.603912] Registered led device:
led:alarm
Aug 27 12:40:04 slackware klogd: [ 1.607623] Advanced Linux Sound
Architecture Driver Version 1.0.20.
Aug 27 12:40:04 slackware klogd: [ 1.615441] ALSA device list:
Aug 27 12:40:04 slackware klogd: [ 1.618147] No soundcards found.
Aug 27 12:40:04 slackware klogd: [ 1.621789] TCP cubic registered
Aug 27 12:40:04 slackware klogd: [ 1.624196] NET: Registered protocol
family 17
Aug 27 12:40:04 slackware klogd: [ 1.626686] ThumbEE CPU extension
supported.
Aug 27 12:40:04 slackware klogd: [ 1.632056] input: Efika MX Input as
/devices/virtual/input/input0
Aug 27 12:40:04 slackware klogd: [ 1.635272] VFP support v0.3:
implementor 41 architecture 3 part 30 variant c rev 2
Aug 27 12:40:04 slackware klogd: [ 1.665055] pmic_rtc pmic_rtc.1: setting
system clock to 2011-08-27 12:39:51 UTC (1314448791)
Aug 27 12:40:04 slackware klogd: [ 2.017637] Freeing init memory: 136K
Aug 27 12:40:04 slackware klogd: [ 2.128719] udev[497]: starting version
163
Aug 27 12:40:04 slackware klogd: [ 3.105961] pata_fsl pata_fsl: rchan=29
wchan=28
Aug 27 12:40:04 slackware klogd: [ 3.106298] scsi0 : pata_fsl
Aug 27 12:40:04 slackware klogd: [ 3.108489] ata1: PATA max UDMA/44 irq
70
Aug 27 12:40:04 slackware klogd: [ 3.288690] ata1.00: CFA: Flash Module,
Ver2.M11, max UDMA/100
Aug 27 12:40:04 slackware klogd: [ 3.288842] ata1.00: 30146256 sectors,
multi 1: LBA
Aug 27 12:40:04 slackware klogd: [ 3.331825] ata1.00: configured for
UDMA/44
Aug 27 12:40:04 slackware klogd: [ 3.332319] scsi 0:0:0:0:
Direct-Access ATA Flash Module Ver2 PQ: 0 ANSI: 5
Aug 27 12:40:04 slackware klogd: [ 3.341668] sd 0:0:0:0: Attached scsi
generic sg0 type 0
Aug 27 12:40:04 slackware klogd: [ 3.342506] sd 0:0:0:0: [sda] 30146256
512-byte logical blocks: (15.4 GB/14.3 GiB)
Aug 27 12:40:04 slackware klogd: [ 3.342938] sd 0:0:0:0: [sda] Write
Protect is off
Aug 27 12:40:04 slackware klogd: [ 3.343184] sd 0:0:0:0: [sda] Write
cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 12:40:04 slackware klogd: [ 3.344130] sda: sda1 sda2
Aug 27 12:40:04 slackware klogd: [ 3.356149] sd 0:0:0:0: [sda] Attached
SCSI disk
Aug 27 12:40:04 slackware klogd: [ 3.483131] mxsdhci: MXC Secure Digital
Host Controller Interface driver
Aug 27 12:40:04 slackware klogd: [ 3.483408] mxsdhci: MXC SDHCI
Controller Driver.
Aug 27 12:40:04 slackware klogd: [ 3.486526] mmc0: SDHCI detect irq 187
irq 1 INTERNAL DMA
Aug 27 12:40:04 slackware klogd: [ 3.486717] mxsdhci: MXC SDHCI
Controller Driver.
Aug 27 12:40:04 slackware klogd: [ 3.489867] mmc1: SDHCI detect irq 136
irq 2 INTERNAL DMA
Aug 27 12:40:04 slackware klogd: [ 3.677256] device-mapper: ioctl:
4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
Aug 27 12:40:04 slackware klogd: [ 4.331136] mmc1: new SD card at address
f50f
Aug 27 12:40:04 slackware klogd: [ 4.339225] mmcblk0: mmc1:f50f SD01G 982
MiB
Aug 27 12:40:04 slackware klogd: [ 4.339625] mmcblk0: p1 p2
Aug 27 12:40:04 slackware klogd: [ 4.566126] EXT4-fs (mmcblk0p2):
barriers enabled
Aug 27 12:40:04 slackware klogd: [ 4.567140] kjournald2 starting: pid
630, dev mmcblk0p2:8, commit interval 5 seconds
Aug 27 12:40:04 slackware klogd: [ 4.567437] EXT4-fs (mmcblk0p2): delayed
allocation enabled
Aug 27 12:40:04 slackware klogd: [ 4.567618] EXT4-fs: file extents
enabled
Aug 27 12:40:04 slackware klogd: [ 4.568000] EXT4-fs: mballoc enabled
Aug 27 12:40:04 slackware klogd: [ 4.568162] EXT4-fs (mmcblk0p2): mounted
filesystem with ordered data mode
Aug 27 12:40:04 slackware klogd: [ 5.602717] udev: starting version 153
Aug 27 12:40:04 slackware klogd: [ 5.968147] usbcore: registered new
interface driver usbfs
Aug 27 12:40:04 slackware klogd: [ 5.971490] usbcore: registered new
interface driver hub
Aug 27 12:40:04 slackware klogd: [ 6.036757] sgtl5000-i2c 1-000a:
SGTL5000 revision 17
Aug 27 12:40:04 slackware klogd: [ 6.061298] usbcore: registered new
device driver usb
Aug 27 12:40:04 slackware klogd: [ 6.105326] ehci_hcd: USB 2.0 'Enhanced'
Host Controller (EHCI) Driver
Aug 27 12:40:04 slackware klogd: [ 6.217667] fsl-ehci fsl-ehci.0:
Freescale On-Chip EHCI Host Controller
Aug 27 12:40:04 slackware klogd: [ 6.221323] fsl-ehci fsl-ehci.0: new USB
bus registered, assigned bus number 1
Aug 27 12:40:04 slackware klogd: [ 6.251088] fsl-ehci fsl-ehci.0: irq 18,
io base 0x73f80000
Aug 27 12:40:04 slackware klogd: [ 6.267671] fsl-ehci fsl-ehci.0: USB 2.0
started, EHCI 1.00
Aug 27 12:40:04 slackware klogd: [ 6.271390] usb usb1: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 6.274538] hub 1-0:1.0: USB hub found
Aug 27 12:40:04 slackware klogd: [ 6.277648] hub 1-0:1.0: 1 port detected
Aug 27 12:40:04 slackware klogd: [ 6.497840] fsl-ehci fsl-ehci.1:
Freescale On-Chip EHCI Host Controller
Aug 27 12:40:04 slackware klogd: [ 6.501036] fsl-ehci fsl-ehci.1: new USB
bus registered, assigned bus number 2
Aug 27 12:40:04 slackware klogd: [ 6.527681] fsl-ehci fsl-ehci.1: irq 14,
io base 0x73f80200
Aug 27 12:40:04 slackware klogd: [ 6.547653] fsl-ehci fsl-ehci.1: USB 2.0
started, EHCI 1.00
Aug 27 12:40:04 slackware klogd: [ 6.551201] usb usb2: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 6.554256] hub 2-0:1.0: USB hub found
Aug 27 12:40:04 slackware klogd: [ 6.558179] hub 2-0:1.0: 1 port detected
Aug 27 12:40:04 slackware klogd: [ 6.777575] usb 2-1: new high speed USB
device using fsl-ehci and address 2
Aug 27 12:40:04 slackware klogd: [ 6.780581] fsl-ehci fsl-ehci.2:
Freescale On-Chip EHCI Host Controller
Aug 27 12:40:04 slackware klogd: [ 6.783451] fsl-ehci fsl-ehci.2: new USB
bus registered, assigned bus number 3
Aug 27 12:40:04 slackware klogd: [ 6.807579] fsl-ehci fsl-ehci.2: irq 16,
io base 0x73f80400
Aug 27 12:40:04 slackware klogd: [ 6.917570] fsl-ehci fsl-ehci.2: USB 2.0
started, EHCI 1.00
Aug 27 12:40:04 slackware klogd: [ 6.920978] usb usb3: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 6.923971] hub 3-0:1.0: USB hub found
Aug 27 12:40:04 slackware klogd: [ 6.926769] hub 3-0:1.0: 1 port detected
Aug 27 12:40:04 slackware klogd: [ 6.930284] usb 2-1: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 6.933450] hub 2-1:1.0: USB hub found
Aug 27 12:40:04 slackware klogd: [ 6.936294] hub 2-1:1.0: 4 ports
detected
Aug 27 12:40:04 slackware klogd: [ 7.157616] usb 3-1: new high speed USB
device using fsl-ehci and address 2
Aug 27 12:40:04 slackware klogd: [ 7.308863] usb 3-1: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 7.320428] hub 3-1:1.0: USB hub found
Aug 27 12:40:04 slackware klogd: [ 7.323756] hub 3-1:1.0: 3 ports
detected
Aug 27 12:40:04 slackware klogd: [ 7.407747] usb 2-1.1: new low speed USB
device using fsl-ehci and address 3
Aug 27 12:40:04 slackware klogd: [ 7.528805] usb 2-1.1: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 7.627894] usb 2-1.4: new low speed USB
device using fsl-ehci and address 4
Aug 27 12:40:04 slackware klogd: [ 7.741698] usb 2-1.4: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 7.774611] input: USB Keyboard as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
Aug 27 12:40:04 slackware klogd: [ 7.799839] generic-usb
0003:04D9:FF09.0001: input: USB HID v1.10 Keyboard [USB Keyboard] on
usb-fsl-ehci.1-1.1/input0
Aug 27 12:40:04 slackware klogd: [ 7.837856] usb 3-1.2: new high speed
USB device using fsl-ehci and address 3
Aug 27 12:40:04 slackware klogd: [ 7.870213] input: USB Keyboard as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
Aug 27 12:40:04 slackware klogd: [ 7.877402] generic-usb
0003:04D9:FF09.0002: input: USB HID v1.10 Mouse [USB Keyboard] on
usb-fsl-ehci.1-1.1/input1
Aug 27 12:40:04 slackware klogd: [ 7.927924] input: USB Mouse as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
Aug 27 12:40:04 slackware klogd: [ 7.932546] generic-usb
0003:15D9:0A33.0003: input: USB HID v1.10 Mouse [USB Mouse] on
usb-fsl-ehci.1-1.4/input0
Aug 27 12:40:04 slackware klogd: [ 7.969507] usbcore: registered new
interface driver usbhid
Aug 27 12:40:04 slackware klogd: [ 7.973652] usb 3-1.2: configuration #1
chosen from 1 choice
Aug 27 12:40:04 slackware klogd: [ 7.977313] usbhid: v2.6:USB HID core
driver
Aug 27 12:40:04 slackware klogd: [ 8.009391] usbcore: registered new
interface driver usbmouse
Aug 27 12:40:04 slackware klogd: [ 8.013119] usbmouse: v1.6:USB HID Boot
Protocol mouse driver
Aug 27 12:40:04 slackware klogd: [ 8.097352] usbcore: registered new
interface driver usbkbd
Aug 27 12:40:04 slackware klogd: [ 8.101105] usbkbd: :USB HID Boot
Protocol keyboard driver
Aug 27 12:40:04 slackware klogd: [ 8.171465] uvcvideo: Found UVC 1.00
device Pegatron (04f2:b1b0)
Aug 27 12:40:04 slackware klogd: [ 8.178801] input: Pegatron as
/devices/platform/fsl-ehci.2/usb3/3-1/3-1.2/3-1.2:1.0/input/input4
Aug 27 12:40:04 slackware klogd: [ 8.184645] usbcore: registered new
interface driver uvcvideo
Aug 27 12:40:04 slackware klogd: [ 8.188558] USB Video Class driver
(v0.1.0)
Aug 27 12:40:04 slackware klogd: [ 8.427853] EXT4-fs (mmcblk0p2):
internal journal on mmcblk0p2:8
Aug 27 12:40:04 slackware klogd: [ 12.913472] kjournald starting. Commit
interval 15 seconds
Aug 27 12:40:04 slackware klogd: [ 13.098121] EXT3 FS on mmcblk0p1,
internal journal
Aug 27 12:40:04 slackware klogd: [ 13.101751] EXT3-fs: mounted filesystem
with writeback data mode.
Aug 27 12:40:04 slackware logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo
127.0.0.1
Aug 27 12:40:04 slackware logger: /etc/rc.d/rc.inet1: /sbin/route add -net
127.0.0.0 netmask 255.0.0.0 lo
Aug 27 12:40:06 slackware rpc.statd[965]: Version 1.2.2 starting
Aug 27 12:40:06 slackware sm-notify[966]: Version 1.2.2 starting
Aug 27 12:40:06 slackware klogd: [ 16.641775] NET: Registered protocol
family 10
Aug 27 12:40:06 slackware klogd: [ 16.643226] lo: Disabled Privacy
Extensions
Aug 27 12:40:06 slackware sshd[978]: Server listening on 0.0.0.0 port 22.
Aug 27 12:40:06 slackware sshd[978]: Server listening on :: port 22.
ljones
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.armedslack.org/pipermail/armedslack/attachments/20110827/02362ea4/attachment-0001.html>
More information about the ARMedslack
mailing list