[ARMedslack] Armedslack on the Efika i.MX515 (ARM Cortex-A8 800MHz)

lee jones slothpuck at gmail.com
Sat Aug 27 12:56:39 UTC 2011


Also contents of /var/log/dmesg;

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.31.14.20-efikamx (root at buildbot) (gcc
version 4.5.1 (Ubuntu/Linaro 4.5.1-7ubuntu2) ) #2 PREEMPT Mon Feb 28
21:18:36 CST 2011
[    0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7),
cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[    0.000000] Machine: Genesi Efika MX (Smartbook)
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 106496
[    0.000000] free_area_init_node: node 0, pgdat 80419a14, node_mem_map
8047e000
[    0.000000]   DMA zone: 192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 24384 pages, LIFO batch:3
[    0.000000]   Normal zone: 640 pages used for memmap
[    0.000000]   Normal zone: 81280 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 105664
[    0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p2
rootwait ro
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[    0.000000] Memory: 416MB = 416MB total
[    0.000000] Memory: 410884KB available (3564K code, 589K data, 136K init,
0K highmem)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:368
[    0.000000] MXC IRQ initialized
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] Initializing cgroup subsys ns
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys freezer
[    0.000000] Initializing cgroup subsys net_cls
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] i.MX IRAM pool: 128 KB at 0x9a840000
[    0.000000] IRAM READY
[    0.000000] CPU is i.MX51 Revision 3.0
[    0.000000] MXC GPIO hardware
[    0.000000] Efika MX: mmc0 configured as MicroSD
[    0.000000] Efika MX: mmc1 configured as external SDHC
[    0.000000] Efika MX: Smartbook Revision 2.0
[    0.000000] Efika MX: Memory type Hynix DDR2
[    0.000000] Using SDMA I.API
[    0.000000] MXC DMA API initialized
[    0.000000] bio: create slab <bio-0> at 0
[    0.000000] SCSI subsystem initialized
[    0.000000] CSPI: mxc_spi-0 probed
[    0.000000] IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.000000] NET: Registered protocol family 8
[    0.000000] NET: Registered protocol family 20
[    0.000000] mc13892 Rev 2.0 FinVer 2 detected
[    0.000000] Initializing regulators for Efika MX
[    0.000000] regulator: SW1: 600 <--> 1375 mV
[    0.000000] regulator: SW2: 900 <--> 1850 mV
[    0.000000] regulator: SW3: 1100 <--> 1850 mV
[    0.000000] regulator: SW4: 1100 <--> 1850 mV
[    0.000000] regulator: SWBST: 0 mV
[    0.000000] regulator: VIOHI: 0 mV
[    0.000000] regulator: VPLL: 1050 <--> 1800 mV
[    0.000000] regulator: VDIG: 1650 mV
[    0.000000] regulator: VSD: 1800 <--> 3150 mV
[    0.000000] regulator: VUSB2: 2400 <--> 2775 mV
[    0.000000] regulator: VVIDEO: 2775 mV
[    0.000000] regulator: VAUDIO: 2300 <--> 3000 mV
[    0.000000] regulator: VCAM: 2500 <--> 3000 mV fast normal
[    0.000000] regulator: VGEN1: 1200 <--> 3150 mV
[    0.000000] regulator: VGEN2: 1200 <--> 3150 mV
[    0.000000] regulator: VGEN3: 1800 <--> 2900 mV
[    0.000000] regulator: VUSB: 0 mV
[    0.000000] regulator: GPO1: 0 mV
[    0.000000] regulator: GPO2: 0 mV
[    0.000000] regulator: GPO3: 0 mV
[    0.000000] regulator: GPO4: 0 mV
[    0.000000] Device spi1.0 probed
[    1.067574] Switched to high resolution mode on CPU 0
[    1.067933] NET: Registered protocol family 2
[    1.068321] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[    1.069353] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[    1.069657] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    1.069836] TCP: Hash tables configured (established 16384 bind 16384)
[    1.069867] TCP reno registered
[    1.070091] NET: Registered protocol family 1
[    1.070330] Unpacking initramfs...
[    1.476889] Freeing initrd memory: 6596K
[    1.477916] LPMode driver module loaded
[    1.477954] Static Power Management for Freescale i.MX51
[    1.478289] PM driver module loaded
[    1.478583] sdram autogating driver module loaded
[    1.478963] Bus freq driver module loaded
[    1.479031] mxc_dvfs_core_probe
[    1.479348] DVFS driver module loaded
[    1.479386] i.MXC CPU frequency driver
[    1.480023] DVFS PER driver module loaded
[    1.481823] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.481896] msgmni has been set to 815
[    1.483541] alg: No test for stdrng (krng)
[    1.483912] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[    1.483963] io scheduler noop registered (default)
[    1.484006] io scheduler cfq registered
[    1.500484] Console: switching to colour frame buffer device 30x20
[    1.518939] EDID Dump:
[    1.519591]
00ffffffffffff0006afd220000000000112010380160d780a2b699757559629
[    1.521701]
214f5400000001010101010101010101010101010101b0130040415819201888
[    1.523897]
3100df7d000000180000000f0000000000000000000000000020000000fe0041
[    1.526177]
554f0a202020202020202020000000fe004231303141573032205630200a00c7
[    1.528602] resolution: r(1024, 600), v(1024, 600) o(0, 0)
[    1.530722] bpp=0, hw(0, 0), pclk=19841
[    1.532189] margin(160, 24, 21, 3)
[    1.533657] hv(136, 1), sync=0, vmode=0
[    1.535163] mtl017: Probe LCD Panel: AUO B101AW02 V0
[    1.536711] mxc_ipu mxc_ipu: Channel already disabled 9
[    1.536722] mxc_ipu mxc_ipu: Channel already uninitialized 9
[    1.547594] IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[    1.578714] Serial: MXC Internal UART driver
[    1.579052] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a
Freescale i.MX
[    1.584451] loop: module loaded
[    1.586394] mice: PS/2 mouse device common for all mice
[    1.586635] mc13892 rtc probe start
[    1.588038] pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
[    1.588202] mc13892 rtc probe succeed
[    1.588484] i2c /dev entries driver
[    1.589263] Linux video capture interface: v2.00
[    1.589927] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
[    1.590306] MXC WatchDog Driver 2.0
[    1.590515] clk: Unable to get requested clock: wdog_clk
[    1.590961] MXC Watchdog # 0 Timer: initial timeout 60 sec
[    1.591388] cpuidle: using governor ladder
[    1.591495] cpuidle: using governor menu
[    1.594333] PMIC Character device: successfully loaded
[    1.597366] VPU initialized
[    1.601039] Registered led device: led:capslock
[    1.603912] Registered led device: led:alarm
[    1.607623] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    1.615441] ALSA device list:
[    1.618147]   No soundcards found.
[    1.621789] TCP cubic registered
[    1.624196] NET: Registered protocol family 17
[    1.626686] ThumbEE CPU extension supported.
[    1.629343] mtl017 1-003a: Initializing MTL017 LVDS Controller
[    1.632056] input: Efika MX Input as /devices/virtual/input/input0
[    1.635272] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 2
[    1.639473] regulator_init_complete: incomplete constraints, leaving GPO4
on
[    1.642193] regulator_init_complete: incomplete constraints, leaving GPO3
on
[    1.644774] regulator_init_complete: incomplete constraints, leaving GPO2
on
[    1.647334] regulator_init_complete: incomplete constraints, leaving GPO1
on
[    1.649953] regulator_init_complete: incomplete constraints, leaving
VGEN1 on
[    1.652501] regulator_init_complete: incomplete constraints, leaving VCAM
on
[    1.654999] regulator_init_complete: incomplete constraints, leaving
VAUDIO on
[    1.657424] regulator_init_complete: incomplete constraints, leaving VSD
on
[    1.659901] regulator_init_complete: incomplete constraints, leaving VDIG
on
[    1.662279] regulator_init_complete: incomplete constraints, leaving
SWBST on
[    1.665055] pmic_rtc pmic_rtc.1: setting system clock to 2011-08-27
12:39:51 UTC (1314448791)
[    2.017637] Freeing init memory: 136K
[    2.128719] udev[497]: starting version 163
[    3.094986] libata version 3.00 loaded.
[    3.105961] pata_fsl pata_fsl: rchan=29 wchan=28
[    3.106298] scsi0 : pata_fsl
[    3.108489] ata1: PATA max UDMA/44 irq 70
[    3.288690] ata1.00: CFA: Flash Module, Ver2.M11, max UDMA/100
[    3.288842] ata1.00: 30146256 sectors, multi 1: LBA
[    3.331825] ata1.00: configured for UDMA/44
[    3.332319] scsi 0:0:0:0: Direct-Access     ATA      Flash Module
Ver2 PQ: 0 ANSI: 5
[    3.341668] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.342506] sd 0:0:0:0: [sda] 30146256 512-byte logical blocks: (15.4
GB/14.3 GiB)
[    3.342938] sd 0:0:0:0: [sda] Write Protect is off
[    3.343055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.343184] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[    3.344130]  sda: sda1 sda2
[    3.356149] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.483131] mxsdhci: MXC Secure Digital Host Controller Interface driver
[    3.483408] mxsdhci: MXC SDHCI Controller Driver.
[    3.486526] mmc0: SDHCI detect irq 187 irq 1 INTERNAL DMA
[    3.486717] mxsdhci: MXC SDHCI Controller Driver.
[    3.489867] mmc1: SDHCI detect irq 136 irq 2 INTERNAL DMA
[    3.677256] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel at redhat.com
[    4.331136] mmc1: new SD card at address f50f
[    4.339225] mmcblk0: mmc1:f50f SD01G 982 MiB
[    4.339625]  mmcblk0: p1 p2
[    4.566126] EXT4-fs (mmcblk0p2): barriers enabled
[    4.567140] kjournald2 starting: pid 630, dev mmcblk0p2:8, commit
interval 5 seconds
[    4.567437] EXT4-fs (mmcblk0p2): delayed allocation enabled
[    4.567618] EXT4-fs: file extents enabled
[    4.568000] EXT4-fs: mballoc enabled
[    4.568162] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode
[    5.602717] udev: starting version 153
[    5.953539] SBS: Initial State: Present
[    5.953568] SBS: Battery structure 0x98e75800
[    5.968147] usbcore: registered new interface driver usbfs
[    5.971490] usbcore: registered new interface driver hub
[    6.036757] sgtl5000-i2c 1-000a: SGTL5000 revision 17
[    6.061298] usbcore: registered new device driver usb
[    6.105326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.217667] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    6.221323] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus
number 1
[    6.251088] fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000
[    6.267671] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    6.271390] usb usb1: configuration #1 chosen from 1 choice
[    6.274538] hub 1-0:1.0: USB hub found
[    6.277648] hub 1-0:1.0: 1 port detected
[    6.497840] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    6.501036] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus
number 2
[    6.527681] fsl-ehci fsl-ehci.1: irq 14, io base 0x73f80200
[    6.547653] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    6.551201] usb usb2: configuration #1 chosen from 1 choice
[    6.554256] hub 2-0:1.0: USB hub found
[    6.558179] hub 2-0:1.0: 1 port detected
[    6.777575] usb 2-1: new high speed USB device using fsl-ehci and address
2
[    6.780581] fsl-ehci fsl-ehci.2: Freescale On-Chip EHCI Host Controller
[    6.783451] fsl-ehci fsl-ehci.2: new USB bus registered, assigned bus
number 3
[    6.807579] fsl-ehci fsl-ehci.2: irq 16, io base 0x73f80400
[    6.917570] fsl-ehci fsl-ehci.2: USB 2.0 started, EHCI 1.00
[    6.920978] usb usb3: configuration #1 chosen from 1 choice
[    6.923971] hub 3-0:1.0: USB hub found
[    6.926769] hub 3-0:1.0: 1 port detected
[    6.930284] usb 2-1: configuration #1 chosen from 1 choice
[    6.933450] hub 2-1:1.0: USB hub found
[    6.936294] hub 2-1:1.0: 4 ports detected
[    7.157616] usb 3-1: new high speed USB device using fsl-ehci and address
2
[    7.308863] usb 3-1: configuration #1 chosen from 1 choice
[    7.320428] hub 3-1:1.0: USB hub found
[    7.323756] hub 3-1:1.0: 3 ports detected
[    7.407747] usb 2-1.1: new low speed USB device using fsl-ehci and
address 3
[    7.528805] usb 2-1.1: configuration #1 chosen from 1 choice
[    7.627894] usb 2-1.4: new low speed USB device using fsl-ehci and
address 4
[    7.741698] usb 2-1.4: configuration #1 chosen from 1 choice
[    7.774611] input: USB Keyboard as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[    7.799839] generic-usb 0003:04D9:FF09.0001: input: USB HID v1.10
Keyboard [USB Keyboard] on usb-fsl-ehci.1-1.1/input0
[    7.837856] usb 3-1.2: new high speed USB device using fsl-ehci and
address 3
[    7.870213] input: USB Keyboard as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
[    7.877402] generic-usb 0003:04D9:FF09.0002: input: USB HID v1.10 Mouse
[USB Keyboard] on usb-fsl-ehci.1-1.1/input1
[    7.927924] input: USB Mouse as
/devices/platform/fsl-ehci.1/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
[    7.932546] generic-usb 0003:15D9:0A33.0003: input: USB HID v1.10 Mouse
[USB Mouse] on usb-fsl-ehci.1-1.4/input0
[    7.969507] usbcore: registered new interface driver usbhid
[    7.973652] usb 3-1.2: configuration #1 chosen from 1 choice
[    7.977313] usbhid: v2.6:USB HID core driver
[    8.009391] usbcore: registered new interface driver usbmouse
[    8.013119] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[    8.097352] usbcore: registered new interface driver usbkbd
[    8.101105] usbkbd: :USB HID Boot Protocol keyboard driver
[    8.171465] uvcvideo: Found UVC 1.00 device Pegatron (04f2:b1b0)
[    8.178801] input: Pegatron as
/devices/platform/fsl-ehci.2/usb3/3-1/3-1.2/3-1.2:1.0/input/input4
[    8.184645] usbcore: registered new interface driver uvcvideo
[    8.188558] USB Video Class driver (v0.1.0)
[    8.427853] EXT4-fs (mmcblk0p2): internal journal on mmcblk0p2:8
[   12.913472] kjournald starting.  Commit interval 15 seconds
[   13.098121] EXT3 FS on mmcblk0p1, internal journal
[   13.101751] EXT3-fs: mounted filesystem with writeback data mode.

ljones
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.armedslack.org/pipermail/armedslack/attachments/20110827/f17db71c/attachment-0001.html>


More information about the ARMedslack mailing list