[ARMedslack] Fwd: Re: [Arm-netbook] Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support (fwd)
louigi600 at yahoo.it
Fri Jul 26 14:55:19 UTC 2013
I got round to syncing my new image builder:
Touchscreen is still not working on my device ... but if your touchscreen is on the usb bus chances are that it will work.
Da: Davide <louigi600 at yahoo.it>
A: Slackware ARM port <armedslack at lists.armedslack.org>
Inviato: Sabato 20 Luglio 2013 7:50
Oggetto: Re: [ARMedslack] Fwd: Re: [Arm-netbook] Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support (fwd)
My new image builder for the xzpad700 (as soon as I've time to sync it) will prepare images for all the hardware that the fedora currently supports (including the new A20 socs). as a matter of fact I\m using their bootloader and their kernels until I get round to building my own kernel.
Incidently my image builder will let you deploy any distro root filesystem tarball ... but you might need a bit of manual for non slackware root tarballs.
Da: Ottavio Caruso <ottavio2006-usenet2012 at yahoo.com>
A: ARMedslack at lists.armedslack.org
Inviato: Venerdì 19 Luglio 2013 21:15
Oggetto: [ARMedslack] Fwd: Re: [Arm-netbook] Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support (fwd)
For whoever is interested. Maybe it's possible to port Slackware to the A20. Luke Leighton is already producing some prototypes. I've asked on the arm-netbook list if anybody is interested in seeing Slackware running on it.
If that rings any bells, please give a shout.
I might buy one myself if/when the device is usable. My budget is limited as I'm out ot work.
---------- Forwarded message ----------
From: "Antony Antony" <antony at phenome.org>
Date: Jul 19, 2013 2:31 PM
Subject: Re: [Arm-netbook] Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support (fwd)
To: <arm-netbook at lists.phcomp.co.uk>
this is an interesting news item, though my prefeence is a debian.
---------- Forwarded message ----------
Date: Thu, 18 Jul 2013 18:12:35
From: Hans de Goede <hdegoede at redhat.com>
To: linux-sunxi at googlegroups.com, Fedora ARM <arm at lists.fedoraproject.org>,
Development discussions related to Fedora <devel at lists.fedoraproject.org>
Subject: Announcing Fedora 19 ARM remix for Allwinner SOCs release 1,
now with A20 support
I'm very happy to announce the first release (r1) of my Fedora 19 ARM
remix images for Allwinner A10, A10s, A13 and A20 based devices. This
release is based on the official Fedora 19 Final for ARM images,
with u-boot and kernel(s) from the linux-sunxi project:
Besides all the goodies from Fedora-19, this release also contains
the following new items on the Allwinner / sunxi front:
-Support for the new dual core A20 soc (tested with cubieboard2),
this is based on forward porting the core machine code + various
drivers from allwinners 3.3 kernel source dump to the sunxi-3.4
sources. The following has been ported / is supported:
-ehci and ohci usb controllers (usb controllers 1 and 2, controller
0 is an otg controller and is not supported yet.
-video output block (hdmi, vga, lcd, composite out)
-axp pmic including cpu voltage scaling
-sound: analog in/out, hdmi audio, spdif out (spdif untested)
-ethernet controller (emac)
Note any functional blocks in the SOC which are not explictly
listed as supported above are not supported atm
-Support for a couple of new boards (38 boards in total now)
You can download it here:
It is important to read the README, the image standard comes without
u-boot pre-loaded since u-boot is board specific. The image includes
a user-friendly simple script to install the right u-boot for
your board, but if you simply xzcat the image to an sdcard, and then
boot your device with the sdcard, things will *not* work.
See the README for a list of currently supported boards.
-Many boards don't have an rtc (A10 and A20 have a builtin one),
or at least no battery backup for it, resulting in the date
+ time being wrong.
-If the date is of by more then a couple of months, "yum update"
won't work because certificate validation fails for the https
connection yum tries to make. So if yum fails to get its repodata
first check (and fix) your date
-The regular (host not otg) usb-port on A10s based boards can be a
bit quirky. It is best to plug in a hub even when using only one
device, otherwise the device may not be recognized. If this happens,
after adding a hub, often a power-cycle is needed too.
-The wifi chip on the Auxtek-T004 hdmi-stick is unsupported atm
And to make sure everyone reads the README, let me print it here
Fedora 19 ARM for Allwinner A10, A10s, A13 and A20 devices README
1) Insert an sdcard, note any data on the card will be destroyed!
2) Make sure the card is not mounted, run "mount" and if the card shows
up in the output umount its partitions
3) Write the img file to the card, ie as root do:
xzcat Fedora-19-a10-armhfp-r1.img.xz > /dev/mmcblk0
4) The card is not yet ready for use! Since the A10 u-boot is board
specific, the image comes without any uboot install, follow the next
steps to install the right u-boot for your board
5) Remove the card, and re-insert it. The uboot partition should get
automatically mounted, if not mount it manually,
6) As root (or through sudo) run: <uboot-part-mount>/select-board.sh, ie:
If you've dialog installed the select-board.sh script will prompt for
your board. If you don't have dialog installed, it will print the list
of supported boards. Lookup your board and re-run the script with the
shortname for your board as argument, ie:
sudo /run/media/hans/uboot/select-board.sh mk802
7) umount the uboot and rootfs partitions, ie:
8) Your sdcard is now ready for use
9) *Before* powering up your A10 device connect it to an hdmi or dvi monitor
10) When first booting from the sdcard inserted Fedora will automatically
reboot once, this is part of the process to resize the root partition to
fill the entire sdcard and is normal behavior.
11) After the automatic reboot Fedora will start with the initial-setup wizard:
11a) Configure networking, note:
* If you've an A10 board with wired ethernet and you want to use dhcp
you don't need to do anything.
* If you've an A20 board, your ethernet will have a random mac-address,
so if you want to configure a static ip-address and want it to stick
across reboots, go to the ethernet-tab, select the mac-address field
and delete its contents, so that the static ip address you're
configuring does not get tied to the random mac-address.
11b) Setup the time zone
11c) Set a root password
11d) Create a user
12) Log in as the just created user
13) Enjoy Fedora on your A10 device
Fedora 19 ARM for Allwinner A10 has been tested with the following devices:
* A13-OLinuXino-MICRO (Olimex)
* Auxtek T003 hdmi tv stick
* Auxtek T004 hdmi tv stick
* BA10 TV Box
* Cubieboard development board 1024 MB RAM
* Cubieboard2 (A20) development board
* Gooseberry development board
* Mele A1000G/A2000G 1024 MB RAM
* Mini-X 1024 MB RAM
* mk802 (with female mini hdmi) 512 MB RAM
* mk802 with A10s (s with a circle around it on the barcode label)
* mk802ii (with male normal hdmi) 1024 MB RAM
* r7 hdmi tv stick
* UHost U1A hdmi tv stick
* Wobo i5 TV Box
Fedora 19 ARM should also work on the following devices:
* A10 tablet sold under various names (whitelabel)
* A13 tablet sold under various names (whitelabel)
* A10s-OLinuXino-MICRO (Olimex)
* A13-OLinuXino (Olimex)
* A20-OLinuXino-MICRO (Olimex)
* Coby MID7042 tablet
* Coby MID8042 tablet
* Coby MID9742 tablet
* Cubieboard development board 512 MB RAM
* DNS AirTab M82 tablet
* EOMA68 A10 CPU card
* H6 netbook
* Hackberry development board
* Hyundai a7hd tablet
* iNet-97F Rev.2 (and clones) tablet
* Mele A1000/A2000 512 MB RAM
* Mele A3700
* Mini-X 512 MB RAM
* mk802 (with female mini hdmi) 1024 MB RAM
* pcDuino development board
* Point of View ProTab 2 IPS 9" tablet
* Point of View ProTab 2 IPS tablet with 3g
* XZPAD700 7" tablet
Configuring the display output
Multiple video outputs at the same time are not supported. By default
hdmi output with EDID is used for all devices, except for tablets/netbooks
where the default output is the lcd.
The default hdmi output with EDID will get the native resolution of your
TV / monitor and use that. Note that in order for this to work your TV /
monitor must be connected *and turned on*, before booting your device.
The output resolution can be configured with the disp.screen0_output_mode
kernel cmdline value, which can be found in the extrargs part of uEnv.txt in
the uboot partition. The default uEnv.txt contains the following value:
This means try to use EDID and if no valid EDID info is found fallback to
The used output can be changed by adding disp.screen0_output_type=X to the
extraargs in uEnv.txt. With X being one of: 0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga
Some per display type notes:
-lcd outputs: Hardcoded to the native mode, disp.screen0_output_mode is ignored
-tv: For the cvbs output disp.screen0_output_mode must be set to one of the
following: pal, pal-svideo, ntsc, ntsc-svideo, pal-m, pal-m-svideo, pal-nc,
pal-nc-svideo. Note the -svideo variants should only be used on boards with
an svideo connector, for composite out use the regular variants, ie:
-hdmi: To override the EDID detected mode, drop the "EDID:" from the
disp.screen0_output_mode value and set it to the desired mode, ie:
-vga: Does not support EDID, "EDID:" must be removed from the
disp.screen0_output_mode value otherwise it will be ignored. interlaced
progressive and refreshrate settings specified are ignored, each resolution
has hardcoded values for these. Example usage:
USB controller caveats
The OTG USB controller in host mode only supports a limited number of
devices, plugging in a hub + mouse + keyboard typically will make either
the mouse or keyboard not work. This is a hardware limitation which we
will likely not be able to work around.
On tv-sticks and top-set boxes, simply avoid the otg connector, instead
use a hub in a regular host usb connector. Note on the mini-x the otg / host
marking is not always correct. If things don't work try using the OTG
On tablets and the gooseberry unfortunately only the otg connector is
available. One solution there is using a single usb-device which is
both a keyboard and a mouse at the same time. IE the receiver for logitech
wireless desktop sets.
Supported hardware components / features:
Fedora 19 ARM for Allwinner A10 supports the following components:
* CPU + PMU + RAM
* Serial ports
* MMC cards
* Internal NAND storage (*)
* Framebuffer on lcd / vga / hdmi / composite video
* Sound both analog out and over hdmi
* OTG USB controller (*)
* Both standard USB host controllers
* Wired Ethernet
* IR (untested at this time) (*)
*) Not supported on A20, the A20 support in the Fedora 19 A10 images is new,
and as such the driver code for these has not been forward-ported from the
Allwinner source dump to the sunxi-3.4 kernel the Fedora 19 A10 images use yet.
Unsupported hardware components:
The following components require various proprietary blobs to be used, and
as such are not supported in the Fedora images. The kernel drivers for them
are present (usually as modules) (*), so if you add the necessary blobs you
might get these to work:
* Mali 400 GPU
* Cedar hardware video & audio decoding and encoding engine
* G2D 2d engine
*) Except for the A20
Differences from stock Fedora
* Since the A10 is not a very powerful soc some services which are enabled by
default on Fedora are disabled in the image, see build-image.sh for a list.
* No plymouth: we log to a serial console for debugging so no pretty splash.
Also we don't use an initrd, so removing the console=ttyS0,115200 from
the extraargs in uEnv.txt will give plymouth, but so late it hardly matters.
Rebuilding the Fedora 19 ARM for Allwinner A10 disk image
Building the Fedora 19 ARM for Allwinner A10 disk image consists of 2 steps
1) Building a uboot.tar.gz and rootfs.tar.gz "overlays", this is done
bu the build-boot-root-sh script
2) Combining uboot.tar.gz and rootfs.tar.gz with an official Fedora 19 arm img,
this combining is done by the build-image.sh script
The a10 image you downloaded is based on Fedora-XFCE-armhfp-19-1-sda.raw
These scripts are hosted here:
A copy of the exact versions of these scripts used to build this Fedora A10
image can be found in the scripts directory of the uboot partition, the
kernel config used during the build can be found here too.
If you want to exactly reproduce this image it is important to use the
scripts from the scripts dir of the uboot partition, as the scripts contain
GIT tags used during the build to checkout the exact versions to build.
The pre-conditions these scripts expect to be met, and the exact usage of
them is documented in comments in the top of each script.
devel mailing list
devel at lists.fedoraproject.org
arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
Send large attachments to arm-netbook at files.phcomp.co.uk
ARMedslack mailing list
ARMedslack at lists.armedslack.org
ARMedslack mailing list
ARMedslack at lists.armedslack.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the ARMedslack