[ARMedslack] Armedslack-current QEMU

[Stuart Winter]

The problem seems to be because :

[   12.186250] sym53c8xx 0000:00:0d.0: BAR 0: can't reserve [io
0x44000000-0x440000ff]
[   12.348049] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre
<nico at fluxnic.net>
[   12.374710] eth0: SMC91C11xFD (rev 1) at d1024000 IRQ 25 [nowait]


The SCSI driver isn't initialising the card properly or something like
that, so sd_mod isn't being loaded by udev since there are no disks.

Compare the dmesg output from the kernel in 13.37:
[   16.344200] sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 27
[   16.356532] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[   16.379719] sym0: SCSI BUS has been reset.
[   16.386938] scsi0 : sym-2.2.3
[   19.414393] sym0: unknown interrupt(s) ignored, ISTAT=0x5 DSTAT=0x80
SIST=0x0
[   19.425751] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK
1.1. PQ: 0 ANSI: 5
[   19.440427] scsi target0:0:0: tagged command queuing enabled, command
queue depth 16.
[   19.455265] scsi target0:0:0: Beginning Domain Validation


I don't know how to fix that yet.


-- 
Stuart Winter
Slackware ARM: www.armedslack.org