[ARMedslack] Cant get -current 3.1.5 to boot

[John O'Donnell]

On 01/01/2012 01:25 PM, Stuart Winter wrote:
>
>> I set it back to 3.1.2 and it boots fine.
>
> Do you have the same memory location settings as in the INSTALL_KIRKWOOD
> doc?
>
> I've seen this before when there's not enough RAM been allocated.
>

GuruPlug>> printenv bootcmd_slk
bootcmd_slk=usb start;fatload usb 1:1 0x01100000 uinitrd-kirkwood-3.1.5;fatload 
usb 1:1 0x00800000 /uImage-kirkwood-3.1.5;bootm 0x00800000 0x01100000


      For installation to a *USB* disc:

      Marvell>>   setenv bootcmd_slk 'usb start;ext2load usb 0:1 0x01100000 
/uinitrd-kirkwood;ext2load usb 0:1 0x00800000 /uImage-kirkwood;bootm 0x00800000 
0x01100000'


-- 
=== Never ask a geek why, just nod your head and slowly back away.===
+================================+==================================+
|  John O'Donnell                |                                  |
|  (Sr. Systems Engineer,        |    http://juanisan.homeip.net    |
|  Net Admin, Programmer, etc.)  |  E-Mail: unixjohn1969 at gmail.com  |
+================================+==================================+
No man is useless who has a friend, and if we are loved we are
indispensable.  -- Robert Louis Stevenson