[ARMedslack] Got a toshiba AC100

[Davide]

Armedslack current I thinks needs 2.6.32 or udev will need to be downgraded ... the libs should be ok as if I remember right they require 2.6.26 or better.
But that's not the major issue right now ;-)
I'm worried about binary compatibility as "armedslack binaries will run on almost any arm platform" but that does not mean they will run on every arm platform. 

David

 

--- Gio 14/7/11, Thorsten Mühlfelder <thenktor at gmx.de> ha scritto:

> Da: Thorsten Mühlfelder <thenktor at gmx.de>
> Oggetto: Re: [ARMedslack] Got a toshiba AC100
> A: "Slackware ARM port" <armedslack at lists.armedslack.org>
> Data: Giovedì 14 luglio 2011, 17:50
> Am Thursday 14 July 2011 17:29:59
> schrieb Dave Dowell:
> > Here's a page which covers the bootloader
> > http://tosh-ac100.wetpaint.com/page/Ubuntu
> 
> And there also is a kernel available and a rootfs (which
> probably can be 
> exchanged with the ARMed Slack one):
> http://ac100.gudinna.com/
> 
> 
> >
> > On 14/07/2011 16:15, Davide wrote:
> > > Hum well I can do with the ordinary fluxbox as
> long as the touchpad
> > > works. I could even accept to run on it a
> framebuffer kdrive as xserver
> > > as long as I can have an ordinary linux
> distribution on it (possibly
> > > slackware or slackware based).
> > >
> > > The real questions are:
> > > do I haveto stick with the original bootloader
> whatever it is or has
> > > someone ported uboot or something else to it or
> do I haveto work with
> > > kexecboot ?
> > >
> > > do I haveto stick with the origina kernel to get
> all the onboard devices
> > > working or can a vanilla kernel be configured to
> handle all the devices
> > > on this thing ?
> > >
> > > will the armedslack binaries run on the ac100 or
> do they need to be
> > > compiled specially for this specific arm
> processor ?
> > >
> > > Regards
> > > David
> > >
> > > --- Gio 14/7/11, Manfred Müller<manfred.mueller at lin2go.com> 
> ha scritto:
> > >> Da: Manfred Müller<manfred.mueller at lin2go.com>
> > >> Oggetto: Re: [ARMedslack] Got a toshiba
> AC100
> > >> A: "Slackware ARM port"<armedslack at lists.armedslack.org>
> > >> Data: Giovedì 14 luglio 2011, 16:42
> > >> Hi list,
> > >>
> > >>> You can search the ML archive for this
> message and ask
> > >>
> > >> Manfred:
> > >>
> > >> although I still own this littele thing I
> gave up on
> > >> porting ARMedslack to it
> > >> because I have to finish the tablet version
> of FluxFlux
> > >> first...
> > >>
> > >> @Thorsten:
> > >>
> > >> ot: was it really needed to reinvent the
> wheel with Salt
> > >> instead of improving the legacy LLS?
> > >>
> > >> Regards, Manfred
> > >>
> _______________________________________________
> > >> ARMedslack mailing list
> > >> ARMedslack at lists.armedslack.org
> > >> http://lists.armedslack.org/mailman/listinfo/armedslack
> > >
> > > _______________________________________________
> > > ARMedslack mailing list
> > > ARMedslack at lists.armedslack.org
> > > http://lists.armedslack.org/mailman/listinfo/armedslack
> >
> > _______________________________________________
> > ARMedslack mailing list
> > ARMedslack at lists.armedslack.org
> > http://lists.armedslack.org/mailman/listinfo/armedslack
> 
> 
> 
> -- 
> Thorsten Mühlfelder
> Salix OS: www.salixos.org
> _______________________________________________
> ARMedslack mailing list
> ARMedslack at lists.armedslack.org
> http://lists.armedslack.org/mailman/listinfo/armedslack
>