[ARMedslack] Armedslack on a dockstar :-)

Claudio Cavalera claudio.cavalera at gmail.com
Sat Nov 13 20:03:44 UTC 2010


I'm clueless :-(
Could someone point me in the right direction?
I think all the info is already available here on the ML in different
threads but I can't make sense of it, any guru who would go through
the threads will easily spot what I'm missing!
For example, what's the story with the uncompressed kernel image here
http://blog.gmane.org/gmane.linux.slackware.armedslack/month=20100801
?
This is what I get with net console, after that I would like to ping
the dockstar and ssh in it but it doesn't get an ip address. :-(

Marvell>> tftpboot 0x1800000 armedslack-13.1/uinitrd.img
Using egiga0 device
TFTP from server 192.168.1.38; our IP address is 192.168.1.229
Filename 'armedslack-13.1/uinitrd.img'.
Load address: 0x1800000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###########
done
Bytes transferred = 14699044 (e04a24 hex)
Marvell>> tftpboot 0x6000000 armedslack-13.1/uImage
tftpboot 0x6000000 armedslack-13.1/uImage
Using egiga0 device
TFTP from server 192.168.1.38; our IP address is 192.168.1.229
Filename 'armedslack-13.1/uImage'.
Load address: 0x6000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ####################
done
Bytes transferred = 2096780 (1ffe8c hex)
Marvell>> usb start
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Marvell>> setenv bootargs console=ttyS0,115200 nic=auto:eth0:dhcp
root=/dev/ram rw;
Marvell>> bootm 0x6000000 0x1800000
## Booting kernel from Legacy Image at 06000000 ...
   Image Name:   Linux-2.6.33.5-kirkwood
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2096716 Bytes = 2 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01800000 ...
   Image Name:   Slackware ARM Installer
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    14698980 Bytes = 14 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...


On Fri, Nov 12, 2010 at 14:23, Claudio Cavalera
<claudio.cavalera at gmail.com> wrote:
> Thorsten,
> could you please provide some guidelines to put armed slack on the dockstar?
> I've explained where I'm stuck at, in the other thread on this ML.
> Thanks a lot,
> Claudio
>
> 2010/9/15 Thorsten Mühlfelder <thenktor at gmx.de>:
>> The Dockstar works fine with the Armed Slack kernel. See my message from
>> 29.08.2010:
>>
>>> OK, I've received my Seagate Freeagent Dockstar. I've flashed a new
>>> U-Boot loader to it. A description can be found here:
>>> http://www.plugapps.com/index.php5?title=PlugApps:Pogoplug_Setboot
>>> http://plugapps.com/os/pogoplug/uboot/
>>>
>>> The board boots fine when the kirkwood kernel is used, that comes with
>>> the mini rootfs. Here is the cpuinfo:
>>>
>>> cat /proc/cpuinfo
>>> Processor       : Feroceon 88FR131 rev 1 (v5l)
>>> BogoMIPS        : 1192.75
>>> Features        : swp half thumb fastmult edsp
>>> CPU implementer : 0x56
>>> CPU architecture: 5TE
>>> CPU variant     : 0x2
>>> CPU part        : 0x131
>>> CPU revision    : 1
>>>
>>> Hardware        : Marvell SheevaPlug Reference Board
>>> Revision        : 0000
>>> Serial          : 0000000000000000
>>
>> I've installed the new U-Boot. Make sure the kernel is called uImage and the
>> initrd is called uInitrd.
>>
>>
>> Am Wednesday 15 September 2010 11:15:11 schrieb Stuart Winter:
>>> > Recently I'm being in touch with the Seagate Dockstar which is a
>>> > promising device based on Kirkwood Soc:
>>> > http://xkyle.com/2010/07/19/the-seagate-dockstar-a-very-cool-linux-device
>>> >/
>>>
>>> This looks like an interesting device.
>>>
>>> You'll probably need to build a new
>>> kernel to begin with patched with support for the Dockstar, because I
>>> don't see anything about the "Dockstar" in the "kirkwood implementations"
>>> in the Kernel armedslack ships.  There might be support in linux 2.6.36,
>>> in which case I'll add it in when I next update the kernel.
>>>
>>> Let us know how you get on with it.  Good luck! :)
>>> _______________________________________________
>>> ARMedslack mailing list
>>> ARMedslack at lists.armedslack.org
>>> http://lists.armedslack.org/mailman/listinfo/armedslack
>>
>>
>>
>> --
>> ____________________________________________________
>> Dipl.-Ing. (FH) Thorsten Mühlfelder
>> Hard- und Softwareentwicklung
>> _______________________________________________
>> ARMedslack mailing list
>> ARMedslack at lists.armedslack.org
>> http://lists.armedslack.org/mailman/listinfo/armedslack
>>
>


More information about the ARMedslack mailing list